An auto reconnector for Windows. This was posted/contributed by way_2_hot_a in his thread: Automatic reconnector (noob version) ITS SO EASY COMON!.

Here is his original post:


Here we go again. Newest and most user friendly Auto RE-Connector for modem to pc connections using pppoe dialers
Made/coded by me way_2_hot_a AKA. ALex

WOW for you guys i even made a video.
Because i want even the Noobiest of the Noobest, Noobs to benefit from this
HERE YOU GO ENJOY: STEP BY STEP VIDEO

STOP DISCONNECTIONS IN THEIR TRACKS!

Ok if you want to hide this I will gladly spoon feed you a solution:
Here you go guys: Virtual Desktop Manager


Hardly any setup required PROMISE!!

~steps~
1. Put the "RE-connection monitor" in a folder
2. In that same folder make a notepad document named: logininfo
3. Edit the notepad document with your account details CONNECTION NAME USERNAME PASSWORD

EXAMPLE Bayandsl Monkeyuser@SOD sillypassword
Separate your connectionName, username, password with TAB-KEY NOT SPACE!

4. save the file Make sure you save the file with the name of: logininfo

THAT'S IT! Double click RE-Connection Monitor and it does everything of you! Use "RE-Connection Monitor" as your new pppoe dialer (internet starter)

Remember just edit the txt files inside the folders. Then run the exe file

UPDATED MIRRORS! Files:

DOWNLOAD!!!

There are two version work exactly the same exept one monitors the connection even faster.
Fast version gets you back online in about 2 seconds after you get DC'd. Normal version is in about 4 seconds

Remember just edit the txt files inside the folders. Then run the exe file
[size=8]

CHEERS

Helpful screenshots





GOD I hope everyone can understand this. thank you amen.

ALex

---

If the post is in size 6 or big sized font, it means I am addressing you as a moderator. If the post is in the default size, it means I am Mikos the plain subscriber.

Bayan Forum Rules

For Windows 7 users, here is how to create a PPPoE Dialer. This was contributed by Franz072193 in his thread: [Easy DIY Tutorial] Creating a PPoE Dialer in Windows 7 .

Here is his original post:


1. Click the Windows 7 Orb.


2. Click Control Panel.


3. Click Network and Internet.


4. Click Network and Sharing Center.


5. Under 'Change your networking settings', select Set up a new connection or network.


6. Select Connect to the Internet and click Next.


7. Click Broadband (PPoE).


8. Type your username.


9. Type your password. Tick 'Show Characters' only if you want to look at the password you have typed or you are going to type. Not recommended if you care for your privacy; Tick 'Remember Password' if you don't want to type your password once you connect to the Internet.


10. Type the name of your Internet connection. bayanDSL is a good name, but by default, Windows will name it Broadband Connection and you can rename it anytime.
(Illustration above)

11. If you want to allow anyone who has access to the computer to use the internet connection, tick 'Allow other people to use this connection'.
(Illustration on #9)

12. Click Connect.
(Illustration on #9)

13. Click Close and you're done.



>>>HELP & SUPPORT<<<


Problem: Windows doesn't have an option to create a shortcut of my connection to the desktop and I'm going CRAZY what should I do?

Solution: Look at your system tray, click that LCD monitor with the fork thing icon and double-click Dial-Up and VPN and choose your internet connection from there and select Connect.


Problem: Windows prompts me of what settings should I apply for my connection. Help me choose.

Solution: If you're at home, then click Home Network. If you're at work, then click Work Network. The third option is not useful since bayanDSL is wired and not wireless. Public Network is only used for Wifi Hotspots.



Problem: I'm going insane again... how can I delete a connection?

Solution: Open Network and Sharing Center, click Change adapter settings and right click on a connection you want to delete and click Delete.

---

If the post is in size 6 or big sized font, it means I am addressing you as a moderator. If the post is in the default size, it means I am Mikos the plain subscriber.

Bayan Forum Rules

Another way to speed up your connection was posted by dzila in his thread: Increase Internet Speed in easy way.

Here is his original post:

Increase your internet Speed by another tricks

Follow the step:-

Go to desktop->
My computer-(right click on)->properties->
then go HARDWARE tab->
Device manager->
Now u see a window of Device manager then
go to Ports->
Communication Port(double click on it and Open).
After open u can see a Communication Port properties.
Go the Port Setting:----and now increase ur "Bits per second" to 128000 and "Flow control" change to Hardware.

then OK, kasama po dito ang Download Speed :)

---

If the post is in size 6 or big sized font, it means I am addressing you as a moderator. If the post is in the default size, it means I am Mikos the plain subscriber.

Bayan Forum Rules

For TORRENT lovers, dnniwa485 came up with optimizing your torrent for downloads in his thread: Torrent Download Optimation.

Here it is:

A Guide :d/

On this guide (or a DIY) were going to optimize your computer for torrent downloads. So lets begin:

Increase TCP/IP limitation on Windows XP SP2 or VISTA SP1/RC: (if youre using a OS that is not listed here you can pass on the second stage)
(note: for vista users we recommend you to upgrade to Service Pack 2, as the half-open limit is removed)

1. Download Half-Open FIX for Windows >> http://www.half-open.com/
2. After that OPEN the program and choose a language (you can choose anything beside of English, as long as you can understand it ^_^)
3. As you can see here.. If youre Current limit is 10 then change it to 100 by entering it in the New Limit

4. Restart youre Computer.

For Router/Router Enabled modem Users: Enable Port-Forwarding (you can skip this if you're in Direct Modem Connection/PPPoE or Bridge Connection)

note: you must enable Port-Forwarding on you're router ... (please Visit your Router Manufacturer Website or Consult the Users Manual how to do it. For Bayantel Router Enabled modems, you can freely ask the moderators and admins how to do it)
note2: please take note the port number that you did enter on the router(5-digit number)

-can't help you with this (as the guide will talk tons of routers how to do it).. you can rather PM me or other users here (like Mikos) how to do it.

Configure Firewall: (If youre using the Windows Firewall as default you can skip these)

note: we cant help you again with this. cause its firewall software dependent.
But the thing you only to do is, you must add to your Exemption/White list the torrent client you are using.
You can rather PM us again or leave a query here.

Configure Client (utorrent .. preffered 1.8.4 stable)

Time to Config your utorrent software to utilize your download speed.

- Open/Launch/Execute/Run Utorrent
- Go to Options>>Preference
- On Tree Bar (see on Left Side of the Window) you can see "Connection" Tree there, click it and it will open the configuration Window
- See below:

*uncheck uPnP
*check NAT-PMP
*uncheck randomized port
*check Add Firewall Excemption (MUST BE CHECKED FOR MOST USERS SPECIALLY WINDOWS FIREWALL ... but in my case im using different firewall software, so checking this will be useless)
*Enter your Port (please use the port that you used for youre router -- other else like Bridge PPPoE Direct modem.. or whatever it is, you can just press random port.)
- On Tree Bar you can see "bandwidth" Tree there, click it and it will open the configuration Window
- See below:

*Upload Rate: Set it to 40-70kbps
*Max Download Rate: (depends on plan... see below)

Tip: Set the download speed that what you SOD times speed is. So it will automatically optimize its connection to the fullest when SOD time is on the go.
*Global Connections: Set it to 500
*Max Peers per torrent: Set it to 300
*Max Upload Slots: Set it to 5
- On Tree Bar you can see "Advance" Tree there, click it and it will open the configuration Window
- See below:

set the value of the following:
*bt.transp_dispotition: Value to 15
*net.max_halfopen: Value to 80 (lets not use the all the half-open ports to accommodate for other programs)

Now for Final Inspection:

- Check Port is correctly Forwarding
* Open Utorrent . then go to Options>>Speed Guide
* Click the "Test if port is Forwarded Correctly",,, after that you must have a conenction like this:


-- Viola Were done.

Note: Now the Final Impact of Download Speed is depends on the peer ratio on the torrent, so make sure it is healthy.
Note2: Keep utorrent running as long as Possible.

Final Product: results



Happy Leeching :D

---

If the post is in size 6 or big sized font, it means I am addressing you as a moderator. If the post is in the default size, it means I am Mikos the plain subscriber.

Bayan Forum Rules

How about a background for your USB drive? Dzila in is thread: Put background to your USB DRIVE!! gave us just that.

Here is that post:

share ko lang po :)

Step :1

Copy this code to ur text editor,then save it as "desktop.ini"

Code:
[.ShellClassInfo]
IconFile=%SystemRoot%\system32\SHELL32.dll
IconIndex=127
ConfirmFileOp=0

[{BE098140-A513-11D0-A3A4-00C04FD706EC}]
Attributes=1
IconArea_Image="your_picture.jpg"
IconArea_Text="0xFFFFFF"
VeBRA sources - don't delete the tag above, it's there for XXXXX purposes -
[ExtShellFolderViews]
{BE098140-A513-11D0-A3A4-00C04FD706EC}={BE098140-A513-11D0-A3A4-00C04FD706EC}
{5984FFE0-28D4-11CF-AE66-08002B2E1262}={5984FFE0-28D4-11CF-AE66-08002B2E1262}

[{5984FFE0-28D4-11CF-AE66-08002B2E1262}]
PersistMoniker=Folder.htt
PersistMonikerPreview=%WebDir%\folder.bmp

2.Put "desktop.ini and your_picture.jpg in ur USB Drive then Hidden it.
3.Refresh ..and enjoy with new background..

---

If the post is in size 6 or big sized font, it means I am addressing you as a moderator. If the post is in the default size, it means I am Mikos the plain subscriber.

Bayan Forum Rules