|
|
Rank: Advanced Member
Groups: Member
Joined: 7/1/2008
Posts: 254
Points: 768
Location: QC
|
guys i nid help
d ko kasi maintindihan ung problem sa pc ng gf ko
problem:
may 3 pcs na 256mb ram ddr 333 (pc3200)
pero pa check mo sa my computer isang memory card lang un nakikita?
ive tried na tanggalin tapos linisin at ibalik pero ganon parin
nagkaroon pa ng prob nung binalik ko ung 3 sa 3 slot nya ayaw gumana.. amp dko alam bat nagkaganon
tapos ginawa ko 2 muna ilagay ko hanggang sa gumana ung PC
pag binalik ko ung 3 memory cards(RAM) sa slot na 3 ayaw gumana nung CPU tumutunog lang sya
yung tunog na parang walang Mem card na nakasaksak.. badtrip
kaya ngaun ginawa ko 2 mem card lang nilagay ko aun gumana at nag tyatyaga sa 256mb ram ng computer amp
ntry ko na check sa cpu-z at sa properties ng computer
same lang isa parin lumabas na memory
kumbaga parang isa lang nagana... d ko sure kung sira ung memory card e
account # 311381482
pRO - New Chaos- Retired
Cabal PH- Venus Server Retired
PHN - :))
|
|
Rank: Moderator
Groups: Member
, Moderator
Joined: 3/27/2009
Posts: 9,989
Points: 18,085
Location: Sa Web (aka Cyberspace)
|
shakespeare wrote:guys i nid help
d ko kasi maintindihan ung problem sa pc ng gf ko
problem:
may 3 pcs na 256mb ram ddr 333 (pc3200)
pero pa check mo sa my computer isang memory card lang un nakikita?
ive tried na tanggalin tapos linisin at ibalik pero ganon parin
nagkaroon pa ng prob nung binalik ko ung 3 sa 3 slot nya ayaw gumana.. amp dko alam bat nagkaganon
tapos ginawa ko 2 muna ilagay ko hanggang sa gumana ung PC
pag binalik ko ung 3 memory cards(RAM) sa slot na 3 ayaw gumana nung CPU tumutunog lang sya
yung tunog na parang walang Mem card na nakasaksak.. badtrip
kaya ngaun ginawa ko 2 mem card lang nilagay ko aun gumana at nag tyatyaga sa 256mb ram ng computer amp
ntry ko na check sa cpu-z at sa properties ng computer
same lang isa parin lumabas na memory
kumbaga parang isa lang nagana... d ko sure kung sira ung memory card e
ano specs ng computer. ano muna config ng mga memory cards? 1 gb per card? ano yung board?
 FLAMERS shall be severely sanctioned!!!
Please lang MATINONG TANONG LANG SANA ANG ITANONG instead of NONSENSE ONES. The Forum is NOT an Online Technical Support.
For your DSL/Phone concerns please call the hot lines FIRST before posting it in the Forum.
This includes requests for port resets, DSL connection footprints (ATT and SNRs), requests for technicians and repairs.
Please read the Bayan Forum Rules. If the post is in size 6 or big sized font, it means I am addressing you as a moderator. If the post is in the default size, it means I am Mikos the plain subscriber. Bayan Forum Rules
|
|
Rank: Advanced Member
Groups: Member
Joined: 7/1/2008
Posts: 254
Points: 768
Location: QC
|
P4 2.4 ghz socket 478 mpga mobo: P4V8X-X manufacturer: ASUSTEK Computer inc. fbs: 533mhz Memory Type DDR SDRAM Number of Memory Slots 3 x 184 Pin DIMMs Supported RAM speeds 400 MHz • 333 MHz • 266 MHz Max Supported RAM 3 GB http://www.dealtime.com/xPF-P4V8X-Xeto mga nakalagay ngaun slot 1 256mb max bandwidth PC3200 (200mhz) slot 2 256 max bandwidth PC2700 (166mhz)
account # 311381482 pRO - New Chaos- Retired
Cabal PH- Venus Server Retired
PHN - :))
|
|
Rank: Moderator
Groups: Forum Helper
Joined: 9/9/2008
Posts: 3,099
Points: 8,273
Location: kasama ni lucifer
|
sure ka na kayang hawakan ng motherboard mo ang 1gig? baka hindi niya kaya hawakan ang 3 slots memory possible lack of current ng board.
 
|
|
Rank: Moderator
Groups: Member
, Moderator
Joined: 3/27/2009
Posts: 9,989
Points: 18,085
Location: Sa Web (aka Cyberspace)
|
shakespeare wrote:P4 2.4 ghz
socket 478 mpga
mobo: P4V8X-X
manufacturer: ASUSTEK Computer inc.
fbs: 533mhz
Memory Type DDR SDRAM
Number of Memory Slots 3 x 184 Pin DIMMs
Supported RAM speeds 400 MHz • 333 MHz • 266 MHz
Max Supported RAM 3 GB
ung mga memory cards na ginagamit 266 at 333mhz
nagtataka ako bat pag lahat nilagay ko lahat ng Mem cards d umaandar pc
pero pag 2 lang nilagay ko ung 2 mem card nagana naman d ko alam kung ano meron sila nakakalito iba iba nangyayari eh usually with older MoBos, me jumper settings na kelangan galawin para masupport niya. kasi kung nag be-beep yung PC mo pag 3 sila, it means hindi configured ng tama yung memory jumpers mo at hindi ma accomodate yung extra memory. usually ang gagana talaga diyan ay yung 2. i had the same problem with my Pentium III na 3 din ang memory slots nya. ano ba yung gamit mong memory modules? same size ba (1Gb) lahat? o 2 256Mb at 1 512Mb? o 3 tig 1 Gb? baka kasi dun yung problem gaya nung sa akin.
FLAMERS shall be severely sanctioned!!!
Please lang MATINONG TANONG LANG SANA ANG ITANONG instead of NONSENSE ONES. The Forum is NOT an Online Technical Support.
For your DSL/Phone concerns please call the hot lines FIRST before posting it in the Forum.
This includes requests for port resets, DSL connection footprints (ATT and SNRs), requests for technicians and repairs.
Please read the Bayan Forum Rules. If the post is in size 6 or big sized font, it means I am addressing you as a moderator. If the post is in the default size, it means I am Mikos the plain subscriber. Bayan Forum Rules
|
|
Rank: Advanced Member
Groups: Member
Joined: 7/1/2008
Posts: 254
Points: 768
Location: QC
|
tig 256mb lang sya dati naman gumagana eh 768mb dati to tapos isang araw nalang nagin 256mb na lng lumalabas sa my computer- properties wala naman ako ginalaw sa mga jumpers eh  
account # 311381482 pRO - New Chaos- Retired
Cabal PH- Venus Server Retired
PHN - :))
|
|
Rank: Advanced Member
Groups: Member
Joined: 7/1/2008
Posts: 254
Points: 768
Location: QC
|
up
account # 311381482
pRO - New Chaos- Retired
Cabal PH- Venus Server Retired
PHN - :))
|
|
Rank: Moderator
Groups: Member
, Moderator
Joined: 3/27/2009
Posts: 9,989
Points: 18,085
Location: Sa Web (aka Cyberspace)
|
chek mo yung ram modules mo. baka kasi me sira ang mga yan. kung bago lang ang mga yan, baka me sira yung dimm slots ng MoBo mo. pacheck mo. kasi kung dating 768 yan tapos nagkaganiyan, possibleng sa board mismo yung problem.
FLAMERS shall be severely sanctioned!!!
Please lang MATINONG TANONG LANG SANA ANG ITANONG instead of NONSENSE ONES. The Forum is NOT an Online Technical Support.
For your DSL/Phone concerns please call the hot lines FIRST before posting it in the Forum.
This includes requests for port resets, DSL connection footprints (ATT and SNRs), requests for technicians and repairs.
Please read the Bayan Forum Rules. If the post is in size 6 or big sized font, it means I am addressing you as a moderator. If the post is in the default size, it means I am Mikos the plain subscriber. Bayan Forum Rules
|
|
Rank: Advanced Member
Groups: Member
Joined: 7/1/2008
Posts: 254
Points: 768
Location: QC
|
T_T badtrip
ok doble check ko nlng siguro sa slot
account # 311381482
pRO - New Chaos- Retired
Cabal PH- Venus Server Retired
PHN - :))
|
|
Rank: Moderator
Groups: Member
, Moderator
Joined: 3/27/2009
Posts: 9,989
Points: 18,085
Location: Sa Web (aka Cyberspace)
|
shakespeare wrote:P4 2.4 ghz socket 478 mpga mobo: P4V8X-X manufacturer: ASUSTEK Computer inc. fbs: 533mhz Memory Type DDR SDRAM Number of Memory Slots 3 x 184 Pin DIMMs Supported RAM speeds 400 MHz • 333 MHz • 266 MHz Max Supported RAM 3 GB http://www.dealtime.com/xPF-P4V8X-Xeto mga nakalagay ngaun slot 1 256mb max bandwidth PC3200 (200mhz) slot 2 256 max bandwidth PC2700 (166mhz) i think alam ko na yung problem. dapat parehas lahat ng memory dimms mo. sample, kung ang slot # 1 mo ay may pc3200 (200 mhz), dapat yung nasa 2 pang slots (slots 2 & 3) dapat pc3200 din siya. madalang ang situation na magkakaiba ang memory frequencies mo sa mga dimm slots ng board mo at nagana. kung gumana man sa umpisa, eventually mag be-breakdown yung system mo. malamang hindi ma negotiate ng MoBo mo yung difference. since magkaiba yung mga speeds/frequencies nila. try mo kaya na iisa ang type ng mga memory modules na ikabit sa mga dimm slots mo? meaning, gawin mong pc2700 lahat ng memory modules mo. tapos try mo uli. even with the new MoBos, hindi pwedeng naka ddr 2 800 ka sa first slot tapos mag ddr 2 667 ka sa second slot. it may work pero mag da downgrade si MoBo to compensate for the slower memory module. eventually, magkaka problem. so better use the same type of memory modules sa lahat ng dimm slots.
FLAMERS shall be severely sanctioned!!!
Please lang MATINONG TANONG LANG SANA ANG ITANONG instead of NONSENSE ONES. The Forum is NOT an Online Technical Support.
For your DSL/Phone concerns please call the hot lines FIRST before posting it in the Forum.
This includes requests for port resets, DSL connection footprints (ATT and SNRs), requests for technicians and repairs.
Please read the Bayan Forum Rules. If the post is in size 6 or big sized font, it means I am addressing you as a moderator. If the post is in the default size, it means I am Mikos the plain subscriber. Bayan Forum Rules
|
|
Rank: Advanced Member
Groups: Member
Joined: 3/22/2009
Posts: 111
Points: -1,136
Location: Valenzuela City
|
alam ko yung mga motherboard merong clock sync sa mga mem modules... kaya auto-adjust yung mem-clock yan sa pinakamabagal na memory card
for ex:
1 x 1gb (DDR333) <-- eto yung susundin nya na speed dahil sya yung pinakamabagal...
1 x 1gb (DDR400)
kaya lalabas nyan... is 2gb RAM na may speed na 333mhz (i tried it on my old computer and works... P4 3.2ghz HTT na may 2gb DDR333/400 na memory)
beep sounds huh...
try mo ganito muna:
kumuha ka nang isang memory.. then try mo ilagay sa bawat slot... kung sa bawat slot na lipat at nag-boboot yung computer mo... maaring merong problem isa sa mga memory mo...
|
|
Rank: Moderator
Groups: Member
, Moderator
Joined: 3/27/2009
Posts: 9,989
Points: 18,085
Location: Sa Web (aka Cyberspace)
|
Good suggestion din ito. I am using a DDR 2 800 on both slots sa akin kasi. Advise ng technician yun na laging parehas para ma max out yung speed ng memory modules. Pero a beeping sound usually means, either bad module or bad slot. Depende din kasi sa tunog ng beep. Ilang long beeps at ilang short beeps yung naririnig mo? Yan kasi ang magsasabi sa iyo kung ano most likely yung sira ng board o ng RAM mo. Pero usually beeps associated with RAM installaitions or memory modules means the modules are either defective or mali ang MoBo configuration mo para sa memory. Pero in this case since nag work na before, chances are baka BAD RAM Modules ka. Also beeping sounds indicate either wrong type of RAM or memory that cannot be identified. Check mo din yung CMOS ng MoBo baka me nabago.
FLAMERS shall be severely sanctioned!!!
Please lang MATINONG TANONG LANG SANA ANG ITANONG instead of NONSENSE ONES. The Forum is NOT an Online Technical Support.
For your DSL/Phone concerns please call the hot lines FIRST before posting it in the Forum.
This includes requests for port resets, DSL connection footprints (ATT and SNRs), requests for technicians and repairs.
Please read the Bayan Forum Rules. If the post is in size 6 or big sized font, it means I am addressing you as a moderator. If the post is in the default size, it means I am Mikos the plain subscriber. Bayan Forum Rules
|
|
Rank: Advanced Member
Groups: Member
Joined: 7/1/2008
Posts: 254
Points: 768
Location: QC
|
ewan ko ba binagay kasi sa gf ko un lumang pc na un
tapos ayaw na balikan nung nag bigay na taga netopia wakekke
un nga rin pinag tataka ko bat iba iba speed nung sa memory card
kahit dito sa bahay pareho binili ko at type
il try it
thanks for the suggestions ^^
account # 311381482
pRO - New Chaos- Retired
Cabal PH- Venus Server Retired
PHN - :))
|
|
Rank: Advanced Member
Groups: Member
Joined: 3/22/2009
Posts: 111
Points: -1,136
Location: Valenzuela City
|
Usuaally a beep with:
Infinity Long Beeps : No Memory Detected
1 Beep = Normal Boot
2 Beep = No Keyboard
1 long Beep + 2 Beep = No Video Card
2 short beep + 1 long beep = CMOS Reset (Factor Settings Set)
No Beep = Bad Install / Board Busted
there are sometimes::
Ambulance Beep = No Memory
2 Beep = Normal Boot
Note: Depende sa Motherboards are corresponding error beeps... kaya refer na lang po sa manual nang computer/device.
|
|
Rank: Moderator
Groups: Member
, Moderator
Joined: 3/27/2009
Posts: 9,989
Points: 18,085
Location: Sa Web (aka Cyberspace)
|
ricXD31 wrote:Usuaally a beep with:
Infinity Long Beeps : No Memory Detected
1 Beep = Normal Boot
2 Beep = No Keyboard
1 long Beep + 2 Beep = No Video Card
2 short beep + 1 long beep = CMOS Reset (Factor Settings Set)
No Beep = Bad Install / Board Busted
there are sometimes::
Ambulance Beep = No Memory
2 Beep = Normal Boot
Note: Depende sa Motherboards are corresponding error beeps... kaya refer na lang po sa manual nang computer/device. Problema ata ni TS is binigay lang ata yung PC sa GF kaya malamang mahihirapan siya to find out kung ano yung beeps ng MoBo niya. Galing ng info mo. Thanks.
FLAMERS shall be severely sanctioned!!!
Please lang MATINONG TANONG LANG SANA ANG ITANONG instead of NONSENSE ONES. The Forum is NOT an Online Technical Support.
For your DSL/Phone concerns please call the hot lines FIRST before posting it in the Forum.
This includes requests for port resets, DSL connection footprints (ATT and SNRs), requests for technicians and repairs.
Please read the Bayan Forum Rules. If the post is in size 6 or big sized font, it means I am addressing you as a moderator. If the post is in the default size, it means I am Mikos the plain subscriber. Bayan Forum Rules
|
|
Rank: Advanced Member
Groups: Member
Joined: 7/1/2008
Posts: 254
Points: 768
Location: QC
|
thanks waw + sa knowledge ko nyahahhaa
salamat po!
account # 311381482
pRO - New Chaos- Retired
Cabal PH- Venus Server Retired
PHN - :))
|
|
Rank: Moderator
Groups: Member
, Moderator
Joined: 3/27/2009
Posts: 9,989
Points: 18,085
Location: Sa Web (aka Cyberspace)
|
Try mo itong application na ito. Baka makatulong sa iyo.
Memory Tester
FLAMERS shall be severely sanctioned!!!
Please lang MATINONG TANONG LANG SANA ANG ITANONG instead of NONSENSE ONES. The Forum is NOT an Online Technical Support.
For your DSL/Phone concerns please call the hot lines FIRST before posting it in the Forum.
This includes requests for port resets, DSL connection footprints (ATT and SNRs), requests for technicians and repairs.
Please read the Bayan Forum Rules. If the post is in size 6 or big sized font, it means I am addressing you as a moderator. If the post is in the default size, it means I am Mikos the plain subscriber. Bayan Forum Rules
|
|
Rank: Advanced Member
Groups: Member
Joined: 3/22/2009
Posts: 111
Points: -1,136
Location: Valenzuela City
|
about manuals... dahil ASUS yang MoBo mo... try visiting @ www.asus.comok ako na nag-hanap para sayu... :D http://dlcdnet.asus.com/pub/ASUS/mb/sock478/p4v8x-x/e1494_p4v8x-x.pdfmanual para sa motherboard mo...
|
|
Rank: Advanced Member
Groups: Member
Joined: 7/1/2008
Posts: 254
Points: 768
Location: QC
|
ayun sa nabasa ko eto naman nakalagay
3x184 PIN DDR DIMM sockets up to 3GB
supports : PC3200/PC2700/PC2100 non- ECC DDR DIMMs
supported naman nya... hmm feeling ko may sira na MOBO
ayaw naman ngaun mg ON amf
account # 311381482
pRO - New Chaos- Retired
Cabal PH- Venus Server Retired
PHN - :))
|
|
Rank: Moderator
Groups: Member
, Moderator
Joined: 3/27/2009
Posts: 9,989
Points: 18,085
Location: Sa Web (aka Cyberspace)
|
shakespeare wrote:ayun sa nabasa ko eto naman nakalagay
3x184 PIN DDR DIMM sockets up to 3GB
supports : PC3200/PC2700/PC2100 non- ECC DDR DIMMs
supported naman nya... hmm feeling ko may sira na MOBO
ayaw naman ngaun mg ON amf
Hmm.... If dati memory... Now ayaw mag on... Hmmmm.... Malamang sira nga ang MoBo. Check mo din PSU niya. Iho, kahit na supported niya, mas advisable talaga na isang klase lang ng memory type ang gagamitin mo.
FLAMERS shall be severely sanctioned!!!
Please lang MATINONG TANONG LANG SANA ANG ITANONG instead of NONSENSE ONES. The Forum is NOT an Online Technical Support.
For your DSL/Phone concerns please call the hot lines FIRST before posting it in the Forum.
This includes requests for port resets, DSL connection footprints (ATT and SNRs), requests for technicians and repairs.
Please read the Bayan Forum Rules. If the post is in size 6 or big sized font, it means I am addressing you as a moderator. If the post is in the default size, it means I am Mikos the plain subscriber. Bayan Forum Rules
|
|
|
Guest |
